DIAL BY NAME-D
term
– 181 –
A2179-10
DESCRIPTION DATA
Assign the Dial By Name function to each
Soft Key on idle status of the D
term
.
The LCD shows a maximum of 4 Soft Keys
at once. If assigning more than 4 Soft Keys
on one status, it is necessary to assign
Scroll key at every 4 keys (on 1st through
4th display).
NOTE 1: Scroll key must be assigned.
NOTE 2: Help key is only available in Pat-
tern No. 3.
NOTE 3: For the Pattern No. 3, the initial
Soft Key data for Dial By Name
are assigned as follows:
NOTE 4: Pattern No. 3 is fixed.
NOTE 5: Dial By Name is available only
when the D
term
is in idle state.
•
(1)
(2)
Y=00-03 Soft Key Pattern No. 0-3 as-
signed by CM12 Y=23
00 ZZ
00: Status No. (Idle state)
NOTE 5
ZZ: 00-15: Soft Key No.
00-03: Indicated on 1st display
04-07: Indicated on 2nd display
08-11: Indicated on 3rd display
12-15: Indicated on 4th display
F5002: Scroll key to change Soft Key
Indication
F5014: Dial By Name for Speed Calling
System (300 Slot Memory)
F5015: Dial By Name for Speed Calling
Station
F5016: Dial By Name for Speed Calling
System (1000-Slot Memory
Block No. 0)
F5017: Dial By Name for Speed Calling
System (1000-Slot Memory
Block No. 0)
F5018: Dial By Name for Speed Calling
System (1000-Slot Memory
Block No. 2)
F5019: Dial By Name for Speed Calling
System (1000-Slot Memory
Block No. 3)
CM9A
A
B
CM9A Y=03
1st Data 2nd Data
0001 F5014
0002 F5015
To Next Page
Loading...
