DIAL BY NAME-D
term
– 183 –
A2179-10
(3) Assignment for Memory Allocation and Station Name
• When using Dial By Name for Speed Calling-System:
DESCRIPTION DATA
Assign the memory block for Speed Call-
ing-System. 300 memory slots are avail-
able per system. The number of slots
available for each Tenant is also 300.
Abbreviated Call Codes required for ac-
cessing this feature are automatically giv-
en to each Tenant as shown in the
following example.
(1)
(2)
00-63: For stations within the Tenant
00-63
XXX YYY
NOTE
XXX: 000-299: First Memory Slot No. in
Block
YYY: 001-300: Number of Slots to be
allocated in Block
For example, to provide 20 memory
slots starting at Slot 60: Data: 060020
Assign the number to be called to the
Memory Slot number allocated by CM71.
•
(1)
(2)
Y=0
000-299: Memory Slot No.
Stored No.:
Outgoing Access Code (Max. 4 digits)
+ + Stored No. (Max. 26 digits)
To set a pause into the Stored No., en-
ter “C” (Fixed pause=1.5 sec) or “D”
(Programmable pause specified by
CM41 Y=0>38) after desired digits
(more than 2 digits).
Assign the name for display, to Memory
Slot number allocated by CM71, by char-
acter codes or character.
•
(1)
(2)
Y=1
000-299: Memory Slot No.
XX...XX: Station Name Character
Code
(Max. 32digits, 16 characters)
See APPENDIX B: CHARACTER
CODE TABLE.
CM72
START
CM71
A
TENANT 00
SLOT 000
SLOT 019
20
MEMORY
SLOTS
00
19
ABBREVIATED
CODES
TENANT 01
SLOT 020
SLOT 034
15
MEMORY
SLOTS
00
14
ABBREVIATED
CODES
,
To Next Page
Loading...
