NEC NEAX 2000 - Page 208

DIAL BY NAME-D
term
– 188 –
A2179-10
DESCRIPTION DATA
Specify the memory area to be used for
Speed Calling-System when using Dial By
Name for Speed Calling-System (1000-
Slot Memory).
(1)
(2)
112: 1000-Slot Memory Block No. 0
0 : Available
1 : Not available
(1)
(2)
111: 1000-Slot Memory Block No. 1
0 : Available
1 : Not available
(1)
(2)
176: 1000-Slot Memory Block No. 2
0 : Available
1 : Not available
(1)
(2)
110: 1000-Slot Memory Block No. 3
0 : Available
1 : Not available
Assign the number to be dialed to each
Memory Slot number, if required. The
numbers to be called are usually set from
individual stations by their station users.
•
(1)
(2)
Y=0
X YY Z
X : 0-3 (Basic), 4-9 (Option):
1000-Slot Memory Block No.
YY: 00-99: 10-Slot Memory Block No.
Z : 0-9: Memory Parcel No.
Stored No.:
Outgoing Call Access Code (Max. 4
digits) + + Stored No. (Max. 32 dig-
its)
To set a pause into the Stored No., en-
ter “C” (Fixed Pause=1.5 sec.) or “D”
(Programmable Pause specified by
CM41 Y=0>38) after desired digits.
CM08
C
CM74
D
,