D
term
– 246 –
A2234-10
HARDWARE REQUIRED
D
term
and DLC card
DESCRIPTION DATA
Allocate the memory area for Speed Call-
ing-Station to each station.
The same memory area must be assigned
on CM73 and CM94, to provide BLF func-
tion on D
term
line key.
(1)
(2)
X-XXXXXXXX: My Line No.
W XX 0 ZZ
W : 0-3 (Basic):
1000-Slot Memory Block No.
XX: 00-99: Start of 10-Slot Memory
Block No.
ZZ: 01-10: Number of 10-Slot Memory
Blocks
NOTE: 1000-Slot Memory Block number 4-9 (6000 Memory Parcels) can not be used to
provide BLF function on D
term
line key.
Assign Speed Calling-Station keys on
each D
term
.
For the key number and the last two digits
of the second data, assign the same num-
ber as follows.
1st Data
2ndData
XXXXXXXX, 01 F1101
XXXXXXXX, 02 F1102
XXXXXXXX, 03 F1103
XXXXXXXX, 16 F1116
•
(1)
(2)
Y=00
My Line No. + + Key No.
F11XX
XX: 00-99: Speed Calling-Station
00-99
NOTE 1: The initial setting of key layout
is for 16 Line/Trunk/Feature
keys (key No. 01-16).
When using key No. 17-24,
data setting of CM12 Y=24,
2nd data=0 is required.
NOTE 2: A station user should set the
required extension number to
the line key on D
term
.
Specify the type of busy indication on the
BLF of the D
term
line key as station base or
extension base.
(1)
(2)
269
0 : Station base
1 : Extension base
CM94
END
CM90
C
...
...
,
To Next Page
Loading...
