FAX ARRIVAL INDICATOR-D
term
– 255 –
A2247-10
DESCRIPTION DATA
Assign the fax call station and fax station
using Hot Line feature.
•
(1)
(2)
Y=00-99
0: FAX Call Station (calling side)
This is the extension to which the call
is directed and will be the fax call in-
dicator on the D
term
.
X-XXXXXXXX: Station No.
(1)
(2)
1: FAX Station (called side)
This is the actual single line port to
be connected to the facsimile ma-
chine.
X-XXXXXXXX: Station No.
Specify the accommodation of the fax call
station to D
term
.
NOTE: This command needs to be set
when assigning a single line sta-
tion as a fax call station number
by CM10.
•
(1)
(2)
Y=05
X-XXXXXXXX: FAX Call Station No.
0 : To accommodate
1 : Not accommodated
Assign the fax call station number as the
arrival indicator to the D
term
.
•
(1)
(2)
Y=00
My Line No. + + Key No.
X-XXXXXXXX: FAX Call Station No.
CM12
CM52
CM90
END
A
,
To Next Page
Loading...
