NEC NEAX 2000 - Page 310

LEAST COST ROUTING-3/6 DIGIT
– 290 –
A2286-10
See LCR Development Sequence and Examples in the following pages.
DESCRIPTION DATA
If the prefix is to be added, assign the fol-
lowing data to the LCR Pattern number.
(1) Assign the 6-digit Prefix Pattern num-
ber to the LCR Pattern number.
•
(1)
(2)
Y=5000-5255
LCR Pattern No. 000-255
150
8050-8099: 6-digit Prefix Pattern No.
00-49
CCC: No Prefix
(2) Assign the office code (3-digits) requir-
ing the Prefix to the 6-digit Prefix Pat-
tern number.
•
(1)
(2)
Y=8000-8049
XXX: 3-digit of Office Code
1 : Allowed
Specify the maximum number of digits to
be dialed by calling party.
The maximum number of digits including
the area codes should be assigned to
each area code.
•
(1)
(2)
Y=5-7 Area Code Development Pattern
No. 5-7 assigned by CM8A
Y=A000
X-X...X: Area code dialed, Max 8 digits
01-24 : 1 digit-24 digits
25-79: 25 digits-79 digits
Provide the Toll Restriction feature to the
required trunk routes.
•
(1)
(2)
Y=11
00-63: Trunk Route No.
0: To provide
Specify route access capability for each
restriction class.
•
(1)
(2)
Y=51-58
00-63: Trunk Route No.
0 : Restricted
1 : Allowed
Assign the Area Code Development Pat-
tern number for Toll Restriction and Maxi-
mum Digit Analysis to each trunk route.
•
(1)
(2)
Y=76
00-63: Trunk Route No.
05-07: Area Code Development Pat-
tern No. 5-7
CM8A
D
CM85
CM35
END