MUSIC ON HOLD
– 348 –
A2346-10
To provide External Hold Tone Source through the COT and DK card:
DESCRIPTION DATA
Assign the COT and DK for interface with
External Hold Tone Source to required
LEN.
NOTE 1: The DK card number must be as-
signed to the first LEN (Level 0)
and third LEN (Level 2) of each
LT slot.
NOTE 2: The COT card number must be
assigned for each tenant. One
External Hold Tone Source can
be provided per tenant.
(1)
(2)
000-763: LEN
DA00-DA09: COT Card No.
NOTE 2
E800-E831 : DK Card No.
For PIM0/1 : E800-E807
For PIM2/3 : E808-E815
For PIM4/5 : E816-E823
For PIM6/7 : E824-E831
NOTE 3: Circuit No. 3 of E831 is used
for built-in External Equip-
ment Interface on MP card by
setting CM44.
Set the function of External Hold Tone
Source interface to the DK card.
(1)
(2)
XX Y
XX : 00-31: Card No. E800-E831 as-
signed by CM10
Y : 0-3: Circuit No.
313: MP built-in External Equipment In-
terface
0000-0009: External Hold Tone for Mu-
sic on Hold
CM44
START
CM10
A
To Next Page
Loading...
