NEC NEAX 2000 - Page 422

RADIO PAGING
– 402 –
A2397-10
HARDWARE REQUIRED
COT card
Radio Paging Equipment provided locally
DESCRIPTION DATA
Assign the route data to the trunk route
number assigned by CM30 Y=00.
•
(1)
(2)
Y=00
50-59: Trunk Route No.
05
•
(1)
(2)
Y=08 Dial Sending to Radio Paging
Equipment
50-59: Trunk Route No.
3 : Dial Pulses are sent out
•
(1)
(2)
Y=13 Max. number of sending digits
50-59: Trunk Route No.
000 : Only dialed No. is sent
001-004: 1 digit-4 digits of Radio No.
and calling station No.
005-254: 2 digits of Radio Paging No.
and calling station No.
NONE : 2 digits of Radio Paging No.
and calling station No.
NOTE: To send a calling station No.
automatically, the data for
CM30 Y=28 must be set to
“X6”.
CM35
E
END