SPLIT CALL FORWARDING-ALL CALLS
– 459 –
A2452-10
NOTE: The operating procedure for Split Call Forwarding-All Calls is as follows:
CM78 is used to assign the destination forwarded when the destination No. 0-7 is spec-
ified.
HARDWARE REQUIRED
D
term
with LCD and DLC card, if required
DESCRIPTION DATA
Select the Dial Tone on setting Split Call
Forwarding-All Calls.
•
(1)
(2)
Y=2
13: Dial Tone on Setting Split Call For-
warding-All Calls
0 : Special Dial Tone
1 : Dial Tone
END
CM48
B
INITIAL
Dial Destination No. X (0-9).
0: BLOCK No. 0
1: 1
2: 2
3: 3
4: 4
5: 5
6: 6
7: BLOCK No. 7
8: Destination for Call Forwarding-All Calls
9: Destination for Speed Calling-Station
(BLOCK No. 0)
+
Dial Access Code for Split Call
Forwarding-All Calls.
or
Depress Split Call Forwarding -
All Calls key.
Destination assigned
by CM78.
To Next Page
Loading...
