STATION/ATTENDANT CONTROLLED CONFERENCE (6/10-PARTY CONFERENCE)
– 470 –
A2463-10
To use this feature by using the feature keys assigned on the D
term
:
HARDWARE REQUIRED
CFT card
× 1: for 6 participants (inclusive of the leader)
CFT card
× 2: for 10 participants (inclusive of the leader)
D
term
and DLC card, if required
DESCRIPTION DATA
Assign the feature key for 6/10-Party Con-
ference, on the D
term
of the Conference
leader.
Assign maximum of 6 or 10 Multiple Line
keys on the D
term
of the Conference lead-
er.
•
(1)
(2)
•
(1)
(2)
Y=00
My Line No. + + Key No.
F0A85: 6-party conference
F0A86: 10-party conference
Y=00
My Line No. + + Key No.
X-XXXXXXXX: Multiple Line No.
Specify the Multiple Line number set by
CM90 to be accommodated to D
term
.
•
(1)
(2)
Y=05
X-XXXXXXXX: Multiple Line No.
0: Accommodated
Assign the card number of the Conference
trunk (CFT card) to the required LEN.
NOTE: The CFT card number must be
assigned to the first LEN (Level
0) of each LT slot.
(1)
(2)
000-763: LEN
ED00-ED03: CFT Card No.
Assign the Service Restriction Class B for
Conference leader.
•
(1)
(2)
Y=02
X-XXXXXXXX: My Line No.
XX ZZ
ZZ: 00-15 : Service Restriction Class
B
Allow Conference trunk access for Confer-
ence Leader in the Service Restriction
Class B assigned by CM12 Y=02.
•
(1)
(2)
Y=69 Conference Leader
00-15: Service Restriction Class B
1 : Allow
CM12
START
END
CM90
CM12
CM10
CM15
,
,
INITIAL
To Next Page
Loading...
