ANNOUNCEMENT SERVICE
– 30 –
A2018-10
To provide the Night Announcement by Digital Announcement Trunk:
DESCRIPTION DATA
Assign a Digital Announcement Trunk card
number to the required LEN.
NOTE: The Digital Announcement Trunk
card number must be assigned
to the first LEN (Level 0), the
third LEN (Level 2), the fifth LEN
(Level 4) and the seventh LEN
(Level 6) of each LT slot.
(1)
(2)
000-763: LEN
EB002-EB127: Digital Announcement
Trunk Card No.
For PIM0/1: EB002-EB031
For PIM2/3: EB032-EB063
For PIM4/5: EB064-EB095
For PIM6/7: EB096-EB127
NOTE: EB000 and EB001 are dedi-
cated to built-in Digital An-
nouncement Trunk of the MP
card.
Assign the Digital Announcement Trunk
number to each incoming trunk.
•
(1)
(2)
•
(1)
(2)
Y=03
000-255: Trunk No.
04: Direct-In Termination
Y=05
000-255: Trunk No.
EB000-EB127: Digital Announcement
Trunk No. assigned by
CM10
Assign the function of the Digital An-
nouncement Trunk to Night Announce-
ment.
•
(1)
(2)
Y=00
000-001: Built-in DAT on MP card
002-127: Digital Announcement Trunk
Card No. (EB002-EB127) as-
signed by CM10
03000: Night Announcement Service
Specify the duration of an Announcement. •
(1)
(2)
Y=0
45
01-30: 4 sec. -120 sec.
(4 sec. increments)
If no data is set, the default setting is 60-64
sec.
To record, replay, or delete a message, as-
sign the respective Digital Announcement
Trunk access code.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A100: Record
A101: Replay
A102: Delete
CM30
CM49
CM20
START
CM10
CM41
END
To Next Page
Loading...
