STATION MESSAGE DETAIL RECORDING (SMDR)
PROGRAMMING
SMDR with AP00 Programming
– 489 –
A2486-10
DESCRIPTION DATA
Specify the method of charging a trans-
ferred call.
(1)
(2)
1
0 : Split charging to both the transfer
destination station and the trans-
ferring station
1 : Charging to the final transfer desti-
nation station
2 : Charging to the first transfer desti-
nation station
Assign the attribute data, depending on
the port (Port 0-3) connected to the
SMDR terminal.
(1)
(2)
See the following table.
See the following table.
• For SMDR (NEAX2400 IMS Format):
NOTE: For the Port 1 and Port 3, data speed 9600 bps can not be set.
CMD001
B
C
AP00 INITIAL
FIRST DATA (1)
MEANING
SECOND
DATA
(2)
MEANING
PORT
0
PORT
1
PORT
2
PORT
3
20 24 28 32 Data Speed 2/3/4/5 1200 bps/2400 bps/4800 bps/
9600 bps
NOTE
21 25 29 33 Stop Bit Length 0/1/2 1 bit/1.5 bits/2 bits
22 26 30 34 Data Length 0/1 7 bits/8 bits
23 27 31 35 Parity 0/1/2 None Parity/Even Parity/Odd
Parity
80 100 120 140 Equipment Type 4/5 Computer 0/Computer 1
81 101 121 141 Priority for Data Processing 0 1st
82 102 122 142 Message Format 3 NEAX2400 IMS Format
84 104 124 144 Protocol 1 Free Wheel
85 105 125 145 Station Address (SA) 48 0
86 106 126 146 Unit Address (UA) 33 !
To Next Page
Loading...
