TOLL RESTRICTION-3/6-DIGIT
– 528 –
A2523-10
DESCRIPTION DATA
Assign the Toll Restriction Patterns with
eight kinds of Trunk Restriction Classes
assigned by CM12 Y=01.
Toll Restriction Pattern 00-15 are preas-
signed as shown below.
If a new Restriction Pattern is required,
change the data of the Restriction Pattern
01-13 (00, 14 and 15 are fixed).
•
(1)
(2)
Y=01-13
Toll Restriction Pattern No. 01-13
1-8: Trunk Restriction Class
0: Restricted
3: Allowed
0: Restricted
3: Allowed
Specify the maximum number of digits to
be dialed during an outgoing call.
The maximum number of digits, including
the area codes, should be assigned to
each area code.
•
(1)
(2)
Y=0-4 Area Code Development Pattern
No. 0-4 assigned by CM35 Y=76
X-X...X
(Area Code dialed, Max. 8 digits)
01-24 : 1-24 digits
25-79 : 25-79 digits
CM81
A
B
CM85
TRUNK
RESTRICTION
CLASS
Y
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 00
TOLL RESTRICTION PATTERN NUMBER ON EACH TRUNK RESTRICTION CLASS
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 00
1 RCA 3 0 3 3 3 0 0 0 3 3 3 3 3 0 3 0
2 RCB 3 0 3 3 0 0 0 0 3 3 0 0 0 0 3 0
3 RCC 3 0 3 0 0 0 0 0 3 0 0 0 0 0 3 0
4 RCD 3 0 0 0 0 0 0 0 0 0 0 0 0 0 3 0
5 RCE 3 0 0 0 0 0 0 0 0 0 0 0 0 0 3 0
6 RCF 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 0
7 RCG 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 0
8 RCH 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 0