TRUNK ANSWER FROM ANY STATION (TAS)
– 534 –
A2523-10
To provide the External TAS Indicator via DK card:
DESCRIPTION DATA
Assign the card number of DK to required
LEN.
NOTE: The DK card number must be
assigned to the first LEN (Level
0) and the third LEN (Level 2) of
each LT slot.
(1)
(2)
000-763: LEN
E800-E831: DK Card No.
For PIM0/1: E800-E807
For PIM2/3: E808-E815
For PIM4/5: E816-E823
For PIM6/7: E824-E831
Assign the TAS Group number assigned
by CM30 Y=17 to circuit number of DK
card.
NOTE: MP built-in External Equipment
Interface is not available for Ex-
ternal TAS Indicator Connection.
(1)
(2)
XX Y
XX: 00-31: DK Card No. assigned by
CM10 (E800-E831)
Y : 0-3: Circuit No.
13XX
XX: 00-63: TAS Group No. 00-63
assigned by CM30 Y=17
Specify the indication pattern on External
TAS Indicator.
(1)
(2)
00
01: 30 IPM (1 sec. ON/OFF)
02: 60 IPM (0.5 sec. ON/OFF)
03: 120 IPM (0.25 sec. ON/OFF)
07: Steady on
NONE : 120 IPM (0.25 sec. ON/OFF)
CM44
CM59
START
END
CM10
To Next Page
Loading...
