NEC NEAX 2000 - Page 583

UNIFORM NUMBERING PLAN
– 563 –
A2556-10
DESCRIPTION DATA
Assign the digits to be added when adding
a digits to those sent to a distant office.
•
(1)
(2)
Y=5000-5255
100: Designation of digit Addition
Pattern No.
9000-9255: Digit Addition Pattern No.
000-255
CCC: No digit addition
•
(1)
(2)
Y=9000-9255
Digit Addition Pattern No. 000-255
0
X-X...X: Digits to be added (Max. 32
digits.)
X=0-9, A (*), B (#), C (Fixed Pause)
D (Programmable Pause)
Assign the digit to be added to required
trunk routes when adding a digits to the
digits received from a distant office.
•
(1)
(2)
Y=17
00-63: Trunk Route No.
00: “0” Addition
01: “1” Addition
02: “2” Addition
03: “3” Addition
04: “4” Addition
05: “5” Addition
06: “6” Addition
07: “7” Addition
08: “8” Addition
09: “9” Addition
10: 2 digits Addition as per CM50
Y=00>0.
Assign the data for digit deletion to re-
quired trunk routes for deleting the first
one or two digits received from a distant
office.
•
(1)
(2)
Y=17
00-63: Trunk Route No.
11: First one digit deletion
12: First 2 digits deletion
If two digits addition is required (CM35
Y=17 2nd data=10), assign the digits to be
added.
•
(1)
(2)
Y=00
0
XX: Digits to be added
CM35
END
CM8A
B
CM50