VOICE MAIL INTEGRATION
– 579 –
A2566-10
To transfer a call from an Attendant or a station to a VMS by dialing of a Single Digit Feature Ac-
cess Code “9” or by pushing a function key, while hearing RBT or BT from the destination station:
To provide a D
term
with One Touch keys to send Called number + PB Signal after the called party
answered, for VMS operations (such as “VMS Extension number + Mail Box number or Pass-
word”), refer to the programming (1), (3) in the “SPEED CALLING-ONE TOUCH-D
term
”.
page 443
HARDWARE REQUIRED
For interfacing to a VMS: LC card or DLC card
For providing the Single-Line Telephone with a Message Waiting Lamp: 4LCD/8LC card
DESCRIPTION DATA
Specify whether dialing of the Single Digit
Feature Access Code is allowed or not
while hearing RBT.
(1)
(2)
156: Single Digit Feature Access Code
while hearing RBT
0 : Available
1 : Not available
Specify whether dialing of the Single Digit
Feature Access Code is allowed or not
while hearing BT.
(1)
(2)
208: Single Digit Feature Access Code
while hearing BT
0 : Available
1 : Not available
Specify the destination VMS station num-
ber by transferring with Single Digit Fea-
ture Access Code or a function key.
The first data should be the tenant number
of the destination station called.
•
(1)
(2)
Y=18
Destination VMS No. assignment
00-63: Tenant No.
X-XXXXXXXX: VMS station No.
To the ATTCON/DESKCON or the D
term
,
assign a function key to transfer a call to a
VMS while hearing RBT or BT, if required.
•
(1)
(2)
Y=00
For ATTCON/DESKCON:
ATTCON No. (E000-E007) + + Key
No.
F6123: Transferring to VMS
(1)
(2)
For D
term
:
My Line No. + + Key No.
F5001: Transferring to VMS
START
END
CM08
CM51
CM90
,
,
To Next Page
Loading...
Need help?
General