VOICE MESSAGE SYSTEM
– 582 –
A2580-10
To provide Voice Message Waiting-Individual:
(1) When you leave a message for the desired station without using the Single Digit Feature
Access Code, do the following programming.
DESCRIPTION DATA
Assign Digital Announcement Trunk card
number to the required LEN.
NOTE: The Digital Announcement Trunk
card number must be assigned
to the first LEN (Level 0), the
third LEN (Level 2), the fifth LEN
(Level 4) and the seventh LEN
(Level 6) of each LT slot.
(1)
(2)
000-763: LEN
EB002-EB127: Digital Announcement
Trunk Card No.
For PIM0/1: EB002-EB031
For PIM2/3: EB032-EB063
For PIM4/5: EB064-EB095
For PIM6/7: EB096-EB127
NOTE: EB000 and EB001 are dedi-
cated to built-in Digital An-
nouncement Trunk of the MP
card.
Assign the Service Restriction Class A for
the Voice Message Waiting-Individual.
•
(1)
(2)
Y=02
X-XXXXXXXX: Station No.
XX ZZ
XX: 00-15 : Service Restriction Class
A
Assign the Set/Cancel/Retrieve for the
Voice Message Waiting-Individual.
•
(1)
(2)
Y=41
00-15: Service Restriction Class A as-
signed by CM12 Y=02
1 : Allow
Assign Message Waiting Service to the re-
quired stations.
•
(1)
(2)
Y=03
X-XXXXXXXX: Station No.
0: To provide
CM12
CM15
START
CM10
CM13
A
To Next Page
Loading...
