NEC NEAX 2000 - Page 697

MESSAGE REGISTRATION
– 677 –
A2668-10
DESCRIPTION DATA
Assign a Trunk Access Code for SMDR. •
(1)
(2)
Y=44
00-63: Trunk Route No.
00-99: Trunk Access Code
Provide SMDR service for incoming calls
to required trunk routes.
•
(1)
(2)
Y=49
00-63: Trunk Route No.
0: To provide
Specify the timing of SMDR valid call timer
(pseudo-answer timer).
•
(1)
(2)
Y=0
03
01-08: 8 sec.-40 sec.
(4 sec. increments)
If no data is set, the default setting is 20-24
sec.
Specify SMDR service for incoming calls
with Account Code entry.
(1)
(2)
70
0 : Effective for incoming calls with
Account Codes only
1 : Effective for all incoming calls
Send message to PMS, if a checked out
station is originating a C.O. call.
(1)
(2)
88
0 : Not sent
1 : To send
Send information of tandem calls to
SMDR.
(1)
(2)
77
1: To send
Assign the charging Service Class num-
ber to each station number.
(1)
(2)
X-XXXX: Station No.
00 -15: Service Class No.
Send detail call information on outgoing
calls to SMDR.
(1)
(2)
XX 17
XX: Service Class No. assigned by
CMD015
1: To send
Send C.O./Tie Line incoming calls to
SMDR.
(1)
(2)
XX 30
XX: Service Class No. assigned by
CMD015
1: To send
CM35
A
CMD000
CMD015
CMD016
CM41
B