NEC NEAX 2000 - Page 700

MESSAGE WAITING
– 680 –
A2679-10
DESCRIPTION DATA
Assign the Message Front destination to
be routed by dialing MW Retrieve code or
pressing MW key on D
term
to which Mes-
sage Waiting is set.
•
(1)
(2)
Y=15
00-63: Tenant No. to which MW set
D
term
belongs
X-XXXX: Station No./My Line No.
or
E000: Attendant Console
If an Attendant Console is assigned to as
the Message Front destination by CM51
Y=15, set the data for 233 to 0 and set the
data for 234 to 1. With this setting, Mes-
sage Waiting is automatically reset when
the attendant answers.
(1)
(2)
(1)
(2)
233
0: Available
234
1 : Not available
To reset Message Waiting while the Mes-
sage Front station or attendant rings, set
the data for 234 to 0.
(1)
(2)
234
0: Available
To reset Message Waiting when the de-
sired station answers a second call from
the Message Front station or attendant,
set the data for 235 to 0 and set the data
for 234 to 1.
(1)
(2)
(1)
(2)
235
0: Available
234
1 : Not available
Specify whether Message Waiting record
is printed out on Hotel Printer, and the re-
port is sent to PMS when setting or reset-
ting Message Waiting.
(1)
(2)
267
0 : Available
1 : Not available
Assign the Message Waiting function key
to the D
term
of administrative station or
Front Desk Terminal or Attendant Console,
if provided.
•
(1)
(2)
Y=00
My Line No. + + Key No.
• For administrative station
F0040: Message Waiting Set
F0041: Message Waiting Reset
• For guest station w/o MW Lamp
F1005: Message Waiting Lamp
(1)
(2)
ATTCON No. (E000-E007) + + Key
No.
F6101: Message Waiting
F6104: Reset
CM08
CM90
CM51
A
B
,
,