AUTHORIZATION CODE
– 52 –
A2042-10
(2) With AP01 card
DESCRIPTION DATA
Assign the AP number to the AP01 card.
NOTE: The AP number must match the
SENSE switch setting on the
AP01 card.
•
(1)
(2)
Y=0
04-15: AP No.
07: AP01 card
Designate the processor for this feature as
the AP01 card.
(1)
(2)
216: Processor for Authorization Code
1 : AP01 card
Specify whether Service Set Tone should
be sent after dialing the access code for
the Authorization Code.
(1)
(2)
362: Service Set Tone after dialing the
access code
0 : No tone
1 : Service Set Tone
Assign the Service Restriction Class A for
Authorization Code to required stations.
•
(1)
(2)
Y=02
X-XXXX: Station No.
XX ZZ
XX: 00-15 : Service Restriction Class
A
Allow Authorization Code in the Service
Restriction Class A assigned by CM12
Y=02.
•
(1)
(2)
Y=31 Authorization Code
00-15: Service Restriction Class A as-
signed by CM12 Y=02
1 : Allow
Assign the access code for Authorization
Code.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A086: Authorization Code
CM08
CM12
CM15
START
CM05
A
CM20
INITIAL
To Next Page
Loading...
