APPENDIX C D
term
TIMS JOB SPECIFICATIONS
PRINT OPERATIONS
– C3 –
A2C02-10
Condition Code
(2) Totaled Bill
The Totaled Bill is the simple text which contains:
• Calling station number
• The call charge calculated in the AP NOTE 3
• Condition code (See Table above.)
NOTE 1: Whether the trunk access code is included or not can be specified by the CMD000>61.
(The trunk access code is assigned by the CM35 Y=44.) For respecting the personal
privacy, the dialed digits can be masked (prints “X” s instead of the dialed numbers) by
the CMD001>2.
NOTE 2: The call duration can be excluded by the CMD000>36.
NOTE 3: The CMD000>3 designates whether the 0.01 of the main unit of currency (ex. Cent,
centavo, etc.) is required or not.
NOTE 4: The “Call Record Serial Number” can be omitted by the CMD000>12.
NOTE 5: The CMD000>64 designates whether the “Account Code” is printed or not.
NOTE 6: The CMD000>72 designates whether the “Authorization Code” is printed or not.
NOTE 7: The CMD000>37 designates whether the “T” is printed or not.
CONDITION CODE MEANINGS
# Busy indication (More charge will be made as the target station is now
originating another call.)
C The accumulated billing data are cleared
I An extra charge is entered by the following Front Desk Terminal oper-
ation.
REC + Station number + REC + Extra charge + SET
OS International call
T Transferred call
NOTE 7
To Next Page
Loading...
