AUTOMATED ATTENDANT
– 59 –
A2056-10
When the 1st and/or the 2nd answering message is required: CM30 Y=30, 31>2nd data 08,
CM64 Y=0>2nd data 02, or Night Message is required: CM64 Y=2>2nd data 02, do the following
programming.
DESCRIPTION DATA
Assign the Digital Announcement Trunk
card number to the required LEN.
NOTE: The Digital Announcement Trunk
card number must be assigned
to the first LEN (Level 0), the
third LEN (Level 2), the fifth LEN
(Level 4) and the seventh LEN
(Level 6) of each LT slot.
(1)
(2)
000-763: LEN
EB002-EB127: Digital Announcement
Trunk Card No.
For PIM0/1: EB002-EB031
For PIM2/3: EB032-EB063
For PIM4/5: EB064-EB095
For PIM6/7: EB096-EB127
NOTE: EB000 and EB001 are dedi-
cated to built-in Digital An-
nouncement Trunk of the MP
card.
Assign the function of the Digital An-
nouncement Trunk.
•
(1)
(2)
Y=00
000-001: Built-in DAT on MP card
002-127: Digital Announcement Trunk
Card No. (EB002-EB127) as-
signed by CM10
01XX: 1st Answering Message
02XX: 2nd Answering Message/Night
Message
XX : 00-63: Message No.
Assign the Message number to the re-
quired tenants.
•
•
(1)
(2)
Y=01 For 1st Answering Message
Y=02 For 2nd Answering Message/
Night Message
XX: 00-63: Tenant No.
XX: 00-63: Message No. assigned by
CM49 Y=00
To record, replay, or delete a message, as-
sign the respective Digital Announcement
Trunk access codes.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A100: Record
A101: Replay
A102: Delete
CM49
CM20
START
CM10
A
To Next Page
Loading...
