Newport XPS-D - Page 177

XPS Unified Programmer’s Manual
CAUTION
This function must be used with a positioner.
Prototype
int GroupReferencingActionExecute(
int SocketID,
char * GroupName,
char * Action,
char * Sensor,
double Parameter
)
Input parameters
SocketID int Socket identifier gets by the
“TCP_ConnectToServer” function.
GroupName char * Group name.
Action char * Referencing action name.
Sensor char * Referencing sensor name.
Parameter double Referencing parameter (related to the referencing
action).
Output parameters
None.
Return (In addition to the results of “Input Tests Common to all XPS
Functions”)
• 0: No error.
• -17: Parameter out of range or incorrect.
• -18: Positioner Name doesn't exist or unknown command.
• -22: Not allowed action.
• -25: Following Error.
• -28: Home search timeout.
163 EDH0373En1023 — 01/18