Newport XPS-D Programmer's Manual

XPS Unified Programmer’s Manual
5.7 MultipleAxes Group
A MultipleAxes group is an n-positioner object, where n can be any number from 1 to
8.
A MultipleAxes group can be used in GANTRY mode (dual positioner for one or
several positioners).
It includes the PVT (PositionVelocityTime) and PT (PositionTime) trajectories.
EDH0373En1023 — 01/18 24

Newport XPS-D Specifications

General

Brand	Newport
Model	XPS-D
Category	Controller
Language	English