Newport XPS-D Programmer's Manual

XPS Unified Programmer’s Manual
8.9 Error List
code
Error description
2
Error to ignore
1
TCL interpretor error: wrong syntax
0
Successful command
-1
Busy socket: previous command not yet finished
-2
TCP timeout
-3
String command too long
-4
Unknown command
-5
Not allowed due to a positioner error
-7
Wrong format in the command string
-8
Wrong object type for this command
-9
Wrong number of parameters in the command
-10
Wrong parameter type in the command string
-11
Wrong parameters type in the command string: word or word *
expected
-12
Wrong parameter type in the command string: bool or bool * expected
-13
Wrong parameter type in the command string: char * expected
-14
Wrong parameter type in the command string: double or double *
expected
-15
Wrong parameter type in the command string: int or int * expected
-16
Wrong parameter type in the command string: unsigned int or
unsigned int * expected
-17
Parameter out of range
-18
Positioner Name doesn't exist
-19
GroupName doesn't exist or unknown command
-20
Fatal Error during initialization, read the error.log file for more details
-21
Controller in initialization
-22
Not allowed action
-23
Position compare not set
-24
Not available in this configuration
-25
Following Error
-26
Emergency signal
-27
Move Aborted
-28
Home search timeout
-29
Mnemonic gathering type doesn't exist
-30
Gathering not started
-31
Home position is out of user travel limits
-32
Gathering not configurated
-33
Motion done timeout
-35
Not allowed: home preset outside travel limits
-36
Unknown TCL file
-37
TCL interpretor doesn't run
-38
TCL script can't be killed
-39
Mnemonic action doesn't exist
-40
Mnemonic event doesn't exist
-41
Slave-Master mode not configurated
-42
Jog value out of range
683 EDH0373En1023 — 01/18

Newport XPS-D Specifications

General

Brand	Newport
Model	XPS-D
Category	Controller
Language	English