Newport XPS-D - Tzencodercouplingmatrixset

XPS Unified Programmer’s Manual
7.2.1.332 TZEncoderCouplingMatrixSet
Name
TZEncoderCouplingMatrixSet – Sets TZ encoder coupling matrix parameters.
Input tests
- Refer to section 7.1: “Input Tests Common to all XPS Functions”.
- Checks the group name: (-19)
Description
This function configures the parameters of encoder coupling matrix for the TZ group.
The values are set in the decoupling matrix in the following order:
[ Param1 Param2 Param3 ]
[ Param4 Param5 Param6 ]
[ Param7 Param8 Param9 ]
This API is reserved to TZ group only.
Prototype
int TZEncoderCouplingMatrixSet(
int SocketID,
char GroupName[250],
double Param1,
double Param2,
double Param3,
double Param4,
double Param5,
double Param6,
double Param7,
double Param8,
double Param9
)
Input parameters
SocketID int Socket identifier gets by the
“TCP_ConnectToServer” function.
GroupName char * Group name.
Param1 double Encoder coupling matrix coefficient.
Param2 double Encoder coupling matrix coefficient.
Param3 double Encoder coupling matrix coefficient.
Param4 double Encoder coupling matrix coefficient.
Param5 double Encoder coupling matrix coefficient.
Param6 double Encoder coupling matrix coefficient.
Param7 double Encoder coupling matrix coefficient.
Param8 double Encoder coupling matrix coefficient.
Param9 double Encoder coupling matrix coefficient.
EDH0373En1023 — 01/18 482