Newport XPS-D - Eventextendedconfigurationtriggerset

XPS Unified Programmer’s Manual
7.2.1.25 EventExtendedConfigurationTriggerSet
Name
EventExtendedConfigurationTriggerSet - Defines a combination of one or several
events in buffer.
Input tests
- Refer to section 7.1: “Input Tests Common to all XPS Functions”.
- Event actor: (-8)
- Event name: (-40)
Description
Defines one trigger (combination of one or several events). To activate the trigger, use
the “EventExtendedStart” function. For each event, 4 parameters can be configured…
see event specification to see the necessary parameters. The events are defined in
section “Events and Actions” in the XPS user’s manual.
The number of events in a combination is limited to 10 events.
Each full event name is defined as [actor].[category].event (see Event list):
[actor] - Optional actor name (Group name, Positioner name, GPIO name or Nothing)
[category] - Optional category name (Event category or Nothing)
event - Event name
NOTE
Before activating this event combination, you must define one or several action(s)
with the “EventExtendedConfigurationTriggerSet” function. Next, use the
“EventExtendedStart” or “EventExtendedWait” function to launch these defined
“event and action”.
Prototype
int EventExtendedConfigurationTriggerSet(
int SocketID,
int NbElements,
char * ExtendedEventName,
char * EventParameter1,
char * EventParameter2 ,
char * EventParameter3,
char * EventParameter4
)
EDH0373En1023 — 01/18 68