XPS Unified Programmer’s Manual
7.2.1.299 Reboot
Name
Reboot – Reboots the controller.
Input tests
- Refer to section 7.1: “Input Tests Common to all XPS Functions”.
Description
This function reboots the controller.
NOTE
This function is not a cold reboot (power off/on), it is a warm (soft) reboot.
If an FTP client is connected, this function is not allowed and (-22) error is
returned.
Prototype
int Reboot(
int SocketID
)
Input parameters
SocketID int Socket identifier gets by the
“TCP_ConnectToServer” function.
Output parameters
None.
Return (In addition to the results of “Input Tests Common to all XPS
Functions”)
• 0: No error.
• -22: Not allowed action.
443 EDH0373En1023 — 01/18