Newport XPS-D - Requesttype2

XPS Unified Programmer’s Manual
7.2.2.24 RequestType2
Name
RequestType2– Gets data collection Type 2.
Input tests
- Refer to section 7.1: “Input Tests Common to all XPS Functions”.
Description
This function returns the data collection of type2.
Prototype
int RequestType2(
int SocketID,
char * Header,
charhex32 * TimeStamp,
charhex32 * ZygoLaserPower
)
Input parameters
SocketID int Socket identifier gets by the
“TCP_ConnectToServer” function.
Output parameters
Header char * Type1, Type2 or Type3.
TimeStamp charhex32 * Internal counter in milliseconds.
ZygoLaserPower charhex32 * Zygo Laser Power (ON = 1, OFF = 0).
Return (In addition to the results of “Input Tests Common to all XPS
Functions”)
• 0: No error.
• -2: TCP timeout.
• -136: Wrong parameter type in the command string: charhex32 * expected.
• -205: Not enable in your configuration.
• -1000: Zygo command execution failed.
• -1001: The controller is not connected to Zygo TCP server. Run
ZygoStartInterferometer API.
• Zygo errors: Refer to section 8.9: “Error List”.
619 EDH0373En1023 — 01/18