Newport XPS-D - Positionerpositioncomparedisable

XPS Unified Programmer’s Manual
7.2.1.273 PositionerPositionCompareDisable
Name
PositionerPositionCompareDisable – Disables the position compare mode.
Input tests
- Refer to section 7.1: “Input Tests Common to all XPS Functions”.
- Checks the positioner (must not be a secondary positioner): (-8)
- Checks the encoder (“AquadB” or “AnalogInterpolated”): (-8)
Description
This function disables the position compare mode.
For a more thorough description of the position compare output, please refer to the XPS
Motion Tutorial section Triggers/Position Compare Output.
Prototype
int PositionerPositionCompareDisable(
int SocketID,
char * FullPositionerName
)
Input parameters
SocketID int Socket identifier gets by the
“TCP_ConnectToServer” function.
FullPositionerName char * Positioner name.
Output parameters
None.
Return (In addition to the results of “Input Tests Common to all XPS
Functions”)
• 0: No error.
• -8: Wrong object type for this command.
EDH0373En1023 — 01/18 412