Newport XPS-D - Controllerslavestatusstringget

XPS Unified Programmer’s Manual
7.2.1.7 ControllerSlaveStatusStringGet
Name
ControllerSlaveStatusStringGet – Gets the slave controller’s status description from a
slave controller status code.
Input tests
- Refer to section 7.1: “Input Tests Common to all XPS Functions”.
Description
This function returns the slave controller status description corresponding to a slave
controller status code.
If the slave status code is not referenced then the function returns (-17) error.
Prototype
int ControllerSlaveStatusStringGet(
int SocketID,
int SlaveControllerStatus,
char * SlaveControllerStatusString
)
Input parameters
SocketID int Socket identifier used in each function.
SlaveControllerStatus int Slave controller status code.
Output parameters
SlaveControllerStatusString char * Slave controller status description.
Return (In addition to the results of “Input Tests Common to all XPS
Functions”)
• 0: No error.
49 EDH0373En1023 — 01/18