Newport XPS-D - Controllerstatusread

XPS Unified Programmer’s Manual
7.2.1.9 ControllerStatusRead
Name
ControllerStatusRead – Reads the controller status code.
Input tests
- Refer to section 7.1: “Input Tests Common to all XPS Functions”.
Description
Returns the controller status code. The controller status codes are listed in section
“Group Status List”.
The description of the controller status code can be obtained with the
“ControllerStatusStringGet” function.
Prototype
int ControllerStatusRead(int SocketID, int * ControllerStatus)
Input parameters
SocketID int Socket identifier used in each.
function.
Output parameters
ControllerStatus int * Status of the controller.
Return (In addition to the results of “Input Tests Common to all XPS
Functions”)
• 0: No error.
51 EDH0373En1023 — 01/18