Newport XPS-D - 7 XPS Functions Description; Input Tests Common to All XPS Functions

XPS Unified Programmer’s Manual
7.0 XPS Functions Description
7.1 Input Tests Common to all XPS Functions
For all commands, general input tests are the following:
General:
-20 Controller initialization failed.
-21 XPS initialization in progress.
Check the command format:
-7 Wrong format in the command string.
Check the number of parameters:
-9 Wrong number of parameters in the command.
Check input/output parameter type:
-10 Wrong parameter type in the command string.
-11 Wrong parameters type in the command string: word or word * expected.
-12 Wrong parameter type in the command string: bool or bool * expected.
-13 Wrong parameter type in the command string: char * expected.
-14 Wrong parameter type in the command string: double or double * expected.
-15 Wrong parameter type in the command string: int or int * expected.
-16 Wrong parameter (value < 0) or wrong type in the command string: unsigned
int or unsigned int * expected.
-128 Wrong parameter (value < 0) or wrong type in the command string: unsigned
short or unsigned short * expected.
-129 Wrong parameter (value < 0) or wrong type in the command string: unsigned
long or unsigned long * expected.
-132 Wrong parameter (value < 0) or wrong type in the command string: unsigned
long long or unsigned long long * expected.
EDH0373En1023 — 01/18 42