Newport XPS-D - Front Panel - I;O Control; Front Panel - Device Status; Device Status - Positioner Errors

XPS Unified Programmer’s Manual
3.6 How to Use XPS .NET Assembly from Matlab?
Refer to Matlab for more information on how to load and use a .NET assembly
depending on your Matlab version.
3.6.1 Add Reference to .NET Assembly
% Make the assembly visible from Matlab
asmInfo = NET.addAssembly('Newport.XPS.CommandInterface')
3.6.2 Matlab Code Source
Create an Instance
% Make the instantiation myxps=CommandInterfaceXPS.XPS();
Open XPS Connection
% Connect to the XPS controller
code=myxps.OpenInstrument('192.168.254.254',5001,1000);
Call XPS Functions
% Use API's
[code Version]=myxps.FirmwareVersionGet [code]=myxps.GroupKill('Group1')
[code]=myxps.GroupInitialize('Group1')
[code]=myxps.GroupHomeSearch('Group1')
Close XPS Connection
% Disconnect from the XPS controller
code=myxps.CloseInstrument;
EDH0373En1023 — 01/18 10