XPS Unified Programmer’s Manual
7.2.1.152 PositionerCompensatedFastPCOMemoryReset
Name
PositionerCompensatedFastPCOMemoryReset – Resets CIEFast compensated PCO
data memory.
Input tests
- Refer to section 7.1: “Input Tests Common to all XPS Functions”.
- Checks the positioner name: (-18)
- Checks if CIEFAST compensated PCO pulses generation is enabled: (-121)
Description
This function resets the CIE fast compensated PCO data memory. This function is
useful to remove the data that was previously entered with the
PositionerCompensatedFastPCOLoadToMemory() function.
Prototype
int PositionerCompensatedFastPCOMemoryReset(
int SocketID,
char * PositionerName
)
Input parameters
SocketID int Socket identifier gets by the
“TCP_ConnectToServer” function.
PositionerName char * Positioner name.
Output parameters
None.
Return (In addition to the results of “Input Tests Common to all XPS
Functions”)
• 0: No error.
• -8: Wrong object type for this command.
• -18: Positioner Name doesn't exist or unknown command.
• -121: Function is not allowed due to configuration disabled.
231 EDH0373En1023 — 01/18
To Next Page
Loading...
