Newport XPS-D Programmer's Manual

XPS Unified Programmer’s Manual
Output parameter
None.
Return (In addition to the results of “Input Tests Common to all XPS
Functions”)
• 0: No error.
• -8: Wrong object type for this command.
• -17: Parameter out of range or incorrect.
• -18: Positioner name doesn't exist or unknown command.
• -24: Incorrect file name, bad section name, or not available in this
configuration (check hardware or configuration).
• -115: Function is not supported by current hardware
• -121: Function is not allowed due to configuration disabled.
• -122: Data incorrect (wrong value, wrong format, wrong order or inexistent).
251 EDH0373En1023 — 01/18

Newport XPS-D Specifications

General

Brand	Newport
Model	XPS-D
Category	Controller
Language	English