XPS Unified Programmer’s Manual
Output parameters
NotchFrequency1 double * Notch frequency for filter #1 (Hz).
NotchBandwidth1 double * Notch bandwidth for filter #1 (Hz).
NotchGain1 double * Notch gain for filter #1.
NotchFrequency2 double * Notch frequency for filter #2 (Hz).
NotchBandwidth2 double * Notch bandwidth for filter #2 (Hz).
NotchGain2 double * Notch gain for filter #2.
NotchFrequency3 double * Notch frequency for filter #3 (Hz).
NotchBandwidth3 double * Notch bandwidth for filter #3 (Hz).
NotchGain3 double * Notch gain for filter #3.
Return (In addition to the results of “Input Tests Common to all XPS
Functions”)
• 0: No error.
• -8: Wrong object type for this command.
269 EDH0373En1023 — 01/18
To Next Page
Loading...
