XPS Unified Programmer’s Manual
Output parameters
PhaseCorrectionFn1 double * Numerator frequency (Hertz) for phase
correction filter #1.
PhaseCorrectionFd1 double * Denominator frequency (Hertz) for phase
correction filter #1.
PhaseCorrectionGain1 double * Gain for phase correction filter #1.
PhaseCorrectionFn2 double * Numerator frequency (Hertz) for phase
correction filter #2.
PhaseCorrectionFd2 double * Denominator frequency (Hertz) for phase
correction filter #2.
PhaseCorrectionGain2 double * Gain for phase correction filter #2.
Return (In addition to the results of “Input Tests Common to all XPS
Functions”)
• 0: No error.
• -8: Wrong object type for this command.
EDH0373En1023 — 01/18 286
To Next Page
Loading...
