Newport XPS-D - Page 313

XPS Unified Programmer’s Manual
Input parameters
SocketID int Socket identifier gets by the
“TCP_ConnectToServer” function.
PositionerName char * Positioner name.
NotchModeNumber int Number of the selected notch mode filter.
NotchModeFr double Resonance frequency (Hertz) for notch mode
filter.
NotchModeFa double Anti-resonance frequency (Hertz) for notch
mode filter.
NotchModeZr double Resonance damping factor for notch mode filter.
NotchModeZa double Anti-resonance damping factor for notch mode
filter.
Output parameters
None.
Return (In addition to the results of “Input Tests Common to all XPS
Functions”)
• 0: No error.
• -8: Wrong object type for this command.
• -17: Parameter out of range or incorrect.
• -18: Positioner Name doesn't exist or unknown command.
• -24: Not available in this configuration (check hardware or configuration).
• -134: Changing the loop status is allowed in DISABLE state only.
299 EDH0373En1023 — 01/18