XPS Unified Programmer’s Manual
Output parameters
NotchFrequency1 double * Frequency (Hertz) for notch filter #1.
NotchBandwith1 double * Band width (Hertz) for notch filter #1.
NotchGain1 double * Gain for notch filter #1.
NotchFrequency2 double * Frequency (Hertz) for notch filter #2.
NotchBandwith2 double * Band width (Hertz) for notch filter #2.
NotchGain2 double * Gain for notch filter #2.
Return (In addition to the results of “Input Tests Common to all XPS
Functions”)
• 0: No error.
• -8: Wrong object type for this command.
• -24: Not available in this configuration (check hardware or configuration).
EDH0373En1023 — 01/18 330
To Next Page
Loading...
