To Next Page

To Previous Page

XPS Unified Programmer’s Manual

Prototype

int PositionerCorrectorNotchFiltersSet(

int SocketID,

char * FullPositionerName,

double NotchFrequency1,

double NotchBandwith1,

double NotchGain1,

double NotchFrequency2,

double NotchBandwith2,

double NotchGain2

)

Input parameters

SocketID int Socket identifier gets by the

“TCP_ConnectToServer” function.

FullPositionerName char * Positioner name.

NotchFrequency1 double Frequency (Hertz) for notch filter #1.

NotchBandwith1 double Band width (Hertz) for notch filter #1.

NotchGain1 double Gain for notch filter #1.

NotchFrequency2 double Frequency (Hertz) for notch filter #2.

NotchBandwith2 double Band width (Hertz) for notch filter #2.

NotchGain2 double Gain for notch filter #2.

Output parameters

None.

Return (In addition to the results of “Input Tests Common to all XPS

Functions”)

• 0: No error.

• -8: Wrong object type for this command.

• -17: Parameter out of range or incorrect.

• -24: Not available in this configuration (check hardware or configuration).

EDH0373En1023 — 01/18 332

Newport XPS-D Programmer's Manual

Other manuals for Newport XPS-D