Newport XPS-D - Page 558

XPS Unified Programmer’s Manual
Output parameters
Value1 double * Data of column #1 of line #LinerNumber of the
mapping file #MappingNumber.
Value2 double * Data of column #2 of line #LinerNumber of the
mapping file #MappingNumber.
… double * One data per column of of line #LinerNumber of
the mapping file #MappingNumber.
Return (In addition to the results of “Input Tests Common to all XPS
Functions”)
• 0: No error.
• -9: Wrong number of parameters in the command.
• -17: Parameter out of range or incorrect.
• -18: PositionerName doesn't exist or unknown command.
• -24: Not available in this configuration (secondary positioner is not allowed).
• -121: Function is not allowed due to mapping disabled.
EDH0373En1023 — 01/18 544