Nilfisk-Advance CS7000 - Page 60

Control System 60Service Manual – CS7000
The following is an outline of the conguration
menu. Default values are bold text.
• 1 Machine Type
– 1 Undened (When the machine type is
“undened” the control panel will display the
conguration menu whenever the key is turned
on.)
– 2 Battery
– 3 Diesel
– 4 Propane
– 5 Gas (Petrol)
– Propane LEV
• 2 Battery Type
– 1 Wet (Lead Acid)
– 2 Sealed (gel)
• 3 Detergent System
– 1 Installed?
◦ 1 Not Installed
◦ 2 Installed
– Display Format
◦ 1 Ratio
◦ 2 Percentage
• 4 EcoFlex System
– 1 Not Installed
– 2 Installed
• 5 Dust Guard system
– 1 Not Installed
– 2 Installed
• 6 Ex Scrub System
– 1 Not Installed
– 2 Installed
• 7 Back-Up Alarm
– 1 Not Installed
– 2 Installed
• 8 Signal Lights
– 1 Not Installed
– 2 Installed
• 9 Plugged Filter Kit
– 1 Not Installed
– 2 Installed
• 10 Hopper Temp Kit
– 1 Not Installed
– 2 Installed
• 11 Low Press Wash
– 1 Not Installed
– 2 Installed
• 12 High Press Wash
– 1 Not Installed
– 2 Installed
• 13 Scrub Motor Type OR Broom Motor Type
– 1 Option 1 (Select Option 1 for either Scrub or
Broom motor type)
– 2 Option 2 (Do not select Option 2)
• 14 Display Screen
– 1 US Display
– 2 Global Display
• 15 Light Option (Head Lights - This selection
is no longer supported with main controller
56111560.
– 1 Standard Light
– 2 LED Light
Caution! Selecting “LED Light” on
a machine with standard
incandescent head lights can
cause the bulbs to blow out
and shatter.