Oce PlotWave 340 Operation Guide

Preset Settings values Settings values Function
[Image] [Colour highlight-
ing]
[On]
[Off]
When enabled all coloured informa-
tion is printed darker on the original
than black/grey information. For in-
stance, marked or highlighted text
becomes more visible.
NOTE
It is only relevant for the
copy modes: [Coloured
original], [Lines/text stand-
ard], [Lines/text draft], [Fol-
ded lines/text], [Dark origi-
nal].
[Lighter/Darker] Value from -5 to 5 [Increase the value for darker prints;
decrease for lighter prints.]
[Mirror] [On]
[Off]
[When 'on', the image is mirrored
along the vertical axis (the media
transport direction). ]
[Stamp] Select a stamp
from the list.
NOTE
For more in-
formation
on how to
create a
stamp, see
Create a
stamp
on
page 132
Copy with a stamp
4
Advanced settings for copy jobs
Chapter 4 - Use the Printing System
207

Oce PlotWave 340 Specifications

General

Print Resolution	600 x 1200 dpi
Maximum Roll Width	36 inches
Memory	2 GB
Hard Drive	500 GB
Maximum Print Length	Unlimited
Maximum Print Width	36 inches
Media Handling	Roll feed
Connectivity	Ethernet 10/100/1000Base-T
Media Width	297 - 914 mm
Media Types	Recycled
Media Thickness	0.07 - 0.3 mm
Operating Systems Supported	Windows, Linux