Vario PJM PRISMAproduction Explorer
110 A29247-X3-X-6-7670
Jobtype
’Jobtype’ Select a specific jobtype:
’Standard’ You can define image shifts with this type
only.
Stacking facedown. Print order 1-n.
Note: The following impositioning schemes require a target mate-
rial twice the size of the original document! With these schemes
you cannot define ’Store’ as destination for further modifications
with the Web Client.
’Booklet’ (for portrait pages up to DIN A4/US Letter).
Stacking facedown. Print order n-1.
’Calendar’ (for landscape pages up to DIN A4/US Letter)
Stacking facedown. Print order 1-n.
’2 identical copies’ (for pages up to DIN A4/US Letter).
Stacking facedown. Print order 1-n.
’Paperformat’ Select a paper, which has been defined in the PRISMAproduction
database via ’Configuration’ -> ’Paper’
Image Operations
’Image Shift’ Set the image shift for the print job. You can shift front- and back
pages within a range from -500 to 500 mm or from -19.68 to 19.68
inch in x- or y-direction.
For jobtypes ’Booklet’ and ’Calendar’ you can shift values for the
second image accordingly.
As measuring units you can select mm, cm, pixel or inch.
’Centered print’ Activate this option to position the image in the center of the page.
Creep
’Creep’ Dependent on the jobtype you can set creeping for the print job.
’Weight’ Select the paper weight from 40g/m² to 200g/m².
’Volume’ Set the volume of the paper between 0.5 to 5.0.
Layout
’Landscape’ Select this option if the page is turned by 90°.
’Layout’ Depending on the jobtype the following can be selected:
- Simplex
- Duplex
- Tumble
General
’Metric’ Select the basic measuring unit for the image shift. If you check the
box, the unit will be mm. If you uncheck the box, the unit is inch.
’Resolution (dpi)’ Displays the resolution of the selected printer.
To Next Page
Loading...
