PRISMAproduction Explorer Server Files
A29247-X3-X-6-7670 69
5.6 Server Files
Via this node you have access to the files in the following directories on all computers of
the PRISMAproduction network. Here you can also compare files and directories (see also
"Directory Viewer" on page 132):
5.6.1 Libraries
This node gives you access to logical library paths and their contents on the system. To
configure user defined libraries select Configuration -> Library paths. When selecting
files in the PJM List of Files section you can select files from these libraries.
Depending on the language module you can select files from different libraries:
POD
Select original files in their native format from $TARGET.
$OUTPUT saves files in the TIFF, PS and PDF format which have been reconverted from
IOCA.
5.6.2 Devices
The input devices for the APA-, LCDS- and OLDS-Module are collected under this node.
Devices are configured under: Configuration -> Devices.
APA
Select files from the different input devices (CARTRIDGE, QIC, TAPE) wihch are collected
under the $DEVICE library.
LCDS
For LCDS resources select input devices presented under $DEVICE (XFLOPPY_35,
XFLOPPY_525, XRES_CARTRIDGE, XRES_QIC, XRES_TAPE). For LCDS print data
you can select cartridge, channel or tape under the $XDATA_DEVICE library. You can also
select JSLs and resources directly from the jsl and XRESOURCE library.
5.6.3 Archives
Lists the archives for printing and organizing POD data files:
To Next Page
Loading...
