PRISMAproduction Explorer Job Lists
A29247-X3-X-6-7670 75
5.7.5 Job States
processing...
...service active A service is being executed, e.g. conversion
...transferring data Data is being transferred
...printing Data is being transferred to the printer while the printer is printing
...being interrupted An interruption has been requested and the print of the current copy is
being completed
...in output control All the data has been sent to the printer. The pages are being stacked.
Single Fanfold: everything has been printed, but not yet stacked.
Twin only: recto pages have been printed, verso have not yet been printed
waiting...
...for event The job is awaiting the occurrence of an event (see Configuration events
and PJM job attributes)
...for service The job is waiting for the requested service to be available
...for time to run The job is waiting until a time/date event occurs (see PJM Job attributes)
...ready to print The job is waiting for a free printer or was started with the system parame-
ter 'operator confirmation’
finished...
...complete The job has been printed in its entirety. All the sheets have been stacked.
A completed job remains in the job list for the time specified in the system
parameters ('Hold finished jobs')
...locked The status when a job is assigned to a job class for which the entry !!’Lock
Jobs after printing' is defined in the system parameters
exeption...
...hold The job was cancelled with (interrupt job immediately) at 'ready to
print' status
...print error The printer has reported an error
...printing interrupted Status following the interrupt command ( )
...service error Error caused by a service, e.g. error during conversion
...service interrupted Status following the halt command ( ) or interrupt command
( ) when the job has not yet been printed or was at 'ready to print' sta-
tus
...waiting for release The job was submitted in the PJM with the option ' Hold job until confirma-
tion'
To Next Page
Loading...
