Configuration Introduction
A29247-X6-X-6-7670 137
6 Configuration
6.1 Introduction
The configuration interfaces are used to configure an ODS network (ODS = Order Distibu-
tion System). This entails defining which computers are to belong to the ODS network, and
which printers, job classes, etc. are to be made available for users to choose from.
You also use the configuration interfaces to define, manage and modify resources and per-
mit resource sharing, and to make general system settings.
The configuration data is stored in the central database on the master. This data is available
to all the servers in the ODS network. You can edit the configuration data on the master via
any of the servers in the ODS network.
Click the ’Configuration’ node in the PRISMAproduction Explorer and double click the ap-
plication you want to work with.
To Next Page
Loading...
