Oce PRISMAproduction - The LU 6.2 Config Module; The SNA2 TCP Communications Module

APA-Module Components The APA-Module LU 6.2 Connection
A29247-X2-X-8-7670 31
Help Menu
'About': Displays a info window about the LU6.2 Status version.
4.6.4 The LU 6.2Config Module
This Module allows you to configure logical printer settings of the LUs of your system. For
details have a look in the Administrator's Guide to Chapter LU6.2 Configuration.
4.6.5 The SNA2TCP Communications Module
The SNA2TCP communications module is the interface between your MVS system and the
PRISMAproduction server. SNA2TCP is started automatically by the MVS system when a
print request is received, and closed once the job is complete. In normal operation,
SNA2TCP needs no intervention from the user.
However, in special situations (e.g. when debugging is necessary, or for setting a special
configuration), you can make changes to the module's configuration file manually; step log-
ging can be activated. For further details on this subject, please consult the relevant section
of the appendix to this manual.
’Details’ Opens a window with detailed information on the selected connection:
You will get the same window by double-clicking an entry in the list.