System Configuration
156 A29247-X6-X-6-7670
6.7.2 ODS-Parameter
Hold finished jobs [h]
Use this field to specify how many hours you wish successfully completed jobs to be kept
in the job list. The data files belonging to finished jobs are deleted following this time so as
to save space.
If you enter 0, finished jobs are kept due to system requirements for 70 seconds.
Jobs with errors are treated differently: these are kept on the system until they are actually
removed.
Default: 12h
Hold log files [d]
Use this field to specify how many days the ODS log files (/u/prismapro/diag/) are to
be kept.
If you enter 0 h, the log files are not kept at all. The default setting is 2 days.
Hold account files [d]
Equivalent to 'Hold log files', but applies to the files of the account server.
Default: 2 days
Account server name
Enter the name of the current account server. The IP address of the ODS master is inserted
by default.
Min. free diskspace [%]
Enter the minimum amount of disk space in percent of the planned disk space in MB to be
kept free on the ODS server for the '/u/' and ’/root/’ file system. This value applies to all serv-
ers of the PRISMAproduction network. If you enter the value '0', the free disk space will not
be monitored.
In the event that the free space on both file systems falls below the threshold value you
have indicated, ODS will not accept any further jobs on the respective server until there is
more space again or the lock is released manually.
Default and recommendation: 20%
To Next Page
Loading...
